Call a Specialist Today! (02) 9388 1741
Free Delivery! Free Delivery!

Cisco Meraki Power

AC Adapter & PoE Injector

AC Adapter
Cisco Meraki Product
Power AC Adapter
The Cisco Meraki AC Adapter provides a quick and easy way to power your Cisco Meraki Enterprise access points. The Cisco Meraki AC Adapter is compatible with the Cisco Meraki MR Wireless Access Points. Four different plug types ensure compatibility with AC outlets in nearly every country around the globe.
Cisco Meraki AC Adapter for MR Wireless Access Points (AU Plug)
#MA-PWR-30W-AU
List Price: $77.00
Our Price: $32.00

AC Adapter
Cisco Meraki Products
Power PoE Injector
Cisco Meraki MR 802.3AT POE Injector Au Plug
#MA-INJ-4-AU
Our Price: Request a Quote
Cisco Meraki Multigigabit 802.3at PoE Injector
#MA-INJ-5-AU
Our Price: Request a Quote

The Cisco Meraki PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost. This PoE injector is specifically designed to meet the power needs of Cisco Meraki 802.3at-compatible devices. Check the access point specifications to ensure compatibility.

Features & Benefits

Easy Installation

Use Power Over Ethernet to supply power (and optionally data) to Cisco Meraki 802.3at compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Cisco Meraki PoE injector, then plug ethernet cable into the PoE port and route that cable to your 802.3at-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.

Technical Specifications
Power
  • Input Voltage: 100 to 240 VAC
  • Input Current: 0.8A maximum
  • AC Input Frequency: 50-60 Hz
  • Maximum Output Power: 30 W
  • Powered device can be up to 100m away from power injector
Data Compatible with 10/100/1000 Mbit/s Ethernet, full duplex
Environmental
  • Operating Temperature: (32 to 104°F (0 to 40°C)
  • Storage Temperature: (-4 to 158°F (-20 to 70°C)
  • Operating Humidity: 5 to 93%
Additional Features Short-circuit protection
Physical Dimensions
  • 6.3" x 2.1" x 1.4" (160 mm x 52.5 mm x 35.5 mm)
  • Weight: 0.46 lb (210 g)
Mounting Mounts to walls (anchors and screws not included)
Compatibility
  • Complies with 802.3at standard
  • Backward compatibility with 802.3af MR-series access points
LED Indicators
  • Input Power
  • Fault
  • Detect/connected to valid 802.3at load